A combinatorial approach to obtain affinity media with binding properties towards the aflatoxins

In our work we performed a combinatorial solid-phase synthesis in aqueous medium to prepare peptide libraries from which to select an amino acid sequence with binding properties towards aflatoxins.We used polystyrene beads, functionalised with carboxylic groups as solid support and eight amino acids as monomers. During the first step 64 different sequences of two amino acids were prepared by exploiting the principles of combinatorial chemistry; then the binding properties of all sequences towards aflatoxin B(1 )were checked. We determined binding constants towards aflatoxin B(1) and towards aflatoxins B(2), G(1) and G(2). Results were promising, so we prepared a new library by using the selected dipeptide as the starting solid phase. After selecting the best tetrapeptide sequences, we determined binding constants towards the quoted aflatoxins. We obtained binding constants ( K>10(4) M(-1)) similar to those shown by human serum albumin for similar compounds. Preliminary studies on an extraction column were promising for the development of an SPE system and for its application in food matrices.     

π‐Facial Selectivity in the Formation of Tricarbonylchromium(0) Complexes of Estra‐1, 3, 5(10), 6‐tetraenes

The preparation of two η⁶‐estra‐1, 3, 5(10), 6‐tetraene tricarbonylchromium complexes 4 and 6 are described. In both cases only one stereoisomer can be isolated, in contrast to other estrane‐tricarbonylchromium complexes, where complexations are non‐stereoselective. X‐ray crystal structural analysis of 4 discloses that only the more sterically hindered β‐facial isomer is formed. It is assumed that the 6, 7‐olefinic moiety exerts a directive influence on the complexation.     

Positive ion chemistry of esters of carboxylic acids in air plasma at atmospheric pressure

Ionization of esters of carboxylic acids RCOOR' (R = H, alkyl; R' = alkyl) within the air plasma of the Atmospheric Pressure Chemical Ionization (APCI) source occurs largely via H(+)-transfer and, to a minor extent, via NO(+) association. The protonated ester MH(+) is normally observed as M(2)H(+) and as higher aggregates (M(3)H(+), M(3)H(+)(H(2)O)) also at high source temperature. The behavior of M(2)H(+) upon collisional activation is consistent with the reported dissociation of proton-bound dimers to MH(+) species that, in turn, fragment according to the known paths of lowest energy. In addition, other important product ions form within the plasma, some in very high relative abundance, which are attributed to ion-molecule condensation reactions between neutral M and either MH(+) or M(2)H(+) resulting in the elimination of CO, R'OH, alkene from the alkoxy moiety of the ester and HCOOH. A general scheme is proposed to account for the experimental observations, which suggest that the encounter complex formed between MH(+) and M or between M(2)H(+) and M may either collisionally relax to the protonated dimer or trimer, respectively, or react via covalent bond forming and cleaving steps to eliminate stable neutral molecules. The proposed scheme is supported by both the observed concentration dependence and the temperature dependence of the products relative abundances within the plasma. Such reactions can be the dominant process, as in the case of formate esters. A second significant ionization route involves addition of NO(+) to form M(n)NO(+) (n = 1, 2, 3). An additional product corresponding to [M(2)NO(+) - CO(2)] is also observed with iso- and n-butyl formate esters.     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

Positive and negative ion chemistry of the anesthetic halothane (1-bromo-1-chloro-2,2,2-trifluoroethane) in air plasma at atmospheric pressure

The ion chemistry of 1-bromo-1-chloro-2,2,2-trifluoroethane (the common anesthetic halothane) in air plasma at atmospheric pressure was investigated by atmospheric pressure chemical ionization mass spectrometry (APCI-MS). The major positive ion observed at low declustering (API interface) energies is the ionized dimer, M(+.)M, an unexpectedly abundant species which possibly is stabilized by two H-bonding interactions. At higher energies [M--HF](+.) and [M--Br](+) prevail; the former, corresponding to ionized olefin [ClBrC=CF(2)](+.), appears to originate from M(+.)M and is quite stable towards fragmentation. The latter fragment ion ([M--Br](+)) and its analogue, [M--Cl](+), which is also observed though at much lower abundance, are originally ethyl cations (+)CHX--CF(3) (X = Br, Cl) which, upon collisional activation, rearrange and fragment to CHFX(+) via elimination of CF(2). All of the above described ions are also observed in humid air: in addition, the oxygenated ion [ClBrC=CFOH](+.) also forms in humid air via water addition to [ClBrC=CF(2)](+.) and HF elimination, as observed earlier for ionized trichloroethene. In contrast with similar chloro- and fluoro-substituted ethanes, halothane does not react with H(3)O(+) in the APCI plasma, a result confirmed by selected ion APCI triple-quadrupole (TQ) experiments. Major negative ions formed from halothane in the air plasma are Br(-) and, to a lesser extent, Cl(-), and their complexes with neutral halothane. APCI-TQ experiments indicated that Br(-) and Cl(-) are formed via reaction of halothane with O(2) (-.), O(2) (-.)(H(2)O) and O(3) (-.), possibly via dissociative electron transfer or nucleophilic substitution. Competing proton transfer was also observed in the reaction with O(2) (-.) and, at high halothane pressure, also with O(2) (-.)(H(2)O); at lower pressures the molecular anion M(-.) was observed instead. The other minor anions of the air plasma, NO(2) (-), N(2)O(2) (-.) and NO(3) (-), were found to be unreactive towards halothane.     

Synthesis, structure and conformation of partially-modified retro- and retro-inverso psi[NHCH(CF3)]Gly peptides

Partially modified retro- (PMR) and retro-inverso (PMRI) psi[NHCH(CF(3))]Gly peptides, a conceptually new class of peptidomimetics, have been synthesized in wide structural diversity and variable length by aza-Michael reaction of enantiomerically pure alpha-amino esters and peptides with enantiomerically and geometrically pure N-4,4,4-trifluorocrotonoyl-oxazolidin-2-ones. The factors underlying the observed moderate to good diastereocontrol have been investigated. The conformations of model PMR-psi[NHCH(CF(3))]Gly tripeptides have been studied in solution by (1)H NMR spectroscopy supported by MD calculations, as well as in the solid-state by X-ray diffraction. Remarkable stability of turn-like conformations, comparable to that of parent malonyl-based retropeptides, was evidenced, as a likely consequence of two main factors: 1) severe torsional restrictions about sp(3) bonds in the [CO-CH(2)-CH(CF(3))-NH-CH(R)-CO] module, which is biased by the stereoelectronically demanding CF(3) group and the R side chain; 2) formation of nine-membered intramolecularly hydrogen-bonded rings, which have been clearly detected both in CHCl(3) solution and in some crystal structures. The former factor seems to be more important, as turn-like conformations were found in the solid-state even in the absence of intramolecular hydrogen bonding. The relative configuration of the -C*H(CF(3))NHC*H(R)- stereogenic centers has a major effect on the stability of the turn-like conformation, which seems to require a syn stereochemistry. X-ray diffraction and ab initio computational studies showed that the [-CH(CF(3))NH-] group can be seen as a sort of hybrid between a peptide bond mimic and a proteolytic transition state analogue, as it combines some of the properties of a peptidyl -CONH- group (low NH basicity, CH(CF(3))-NH-CH backbone angle close to 120 degrees, C-CF(3) bond substantially isopolar with the C=O) with some others of the tetrahedral intermediate [-C(OX)(O(-))NH-] involved in the protease-mediated hydrolysis reaction of a peptide bond (high electron density on the CF(3) group, tetrahedral backbone carbon).     

Bicyclic γ-butyrolactones. Relation between conformation of the lactone ring and chiroptical properties

The CD curves of a set of condensed γ-butyrolactones have been investigated. A simple correlation between the sign of the Cotton effect (CE) and the configuration of C can be deduced from the resulting data.     

Heterodinuclear Ln[bond]Na complexes with an asymmetrical macrocyclic compartmental Schiff base

Heterodinuclear lanthanide(III)-sodium(I) complexes [LnNa(L)(Cl)(2)(CH(3)OH)] (Ln=La[bond]Nd, Sm[bond]Lu), where H(2)L is a [1+1] asymmetric compartmental macrocyclic ligand containing a N(3)O(2) Schiff base and a O(3)O(2) crown-ether-like coordination site, have been prepared and characterized by IR, (1)H, (13)C, and (23)Na NMR spectroscopy, mass spectrometry, and electron microscopy. In the solid state, the lanthanide(III) ions coordinate the Schiff-base N(3)O(2) site, and the sodium ion occupies the O(3)O(2) crownlike cavity, as shown by the X-ray crystal structures of the Nd, Eu, Gd, and Yb derivatives. In these complexes, the lanthanide(III) ion is coordinated by two chlorine atoms in the trans position and by three nitrogen and two negatively charged phenol oxygen atoms of the Schiff base, and the ion is heptacoordinated with a pentagonal bipyramidal geometry. The sodium ion is coordinated by three etheric oxygen atoms and the two phenolic oxygens that act as a bridge. A methanol molecule is also coordinated in the apical position of the resulting pentagonal pyramidal polyhedron. A detailed (1)H and (13)C NMR study was carried out in CD(3)OD for both diamagnetic and paramagnetic heterodinuclear complexes [LnNa(L)(Cl)(2)(CH(3)OH)]. The complexes are also isostructural in solution, and their structures parallel those found in the solid state. Moreover, some significative distances determined in the solid state and in solution are comparable. Finally, the potential use of these complexes as molecular probes for the selective recognition of specific metal ions has been tested. In particular, their ability to act as shift reagents and the selectivity of the O(3)O(2) site towards Li(+), Ca(2+), and K(+) were investigated by (23)Na NMR spectroscopy.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Synthesis of stereo-defined α-trifluoromethyl (Tfm)-malic units

Aldol reactions of titanium enolates of N-acyl-1,3-oxazolidin-2-ones with ethyl trifluoropyruvate occurred with low to good stereoselectivity depending on the steric properties of the N-acyl group. Attempts to transform the resulting aldols into peptidomimetics incorporating stereo-defined α-trifluoromethyl (Tfm)-malic units are described.